This American standard covers the requirements for the safety performance of footwear. It is to provide protection against a variety of workplace hazards.
This Canadian standard covers the requirements for the safety performance of footwear. It is to provide protection against a variety of workplace hazards
Protective toe cap and protective midsole
The boots feature a protective toecap and midsole for offering maximum protection against falling and penetrating objects. Tested and certified in accordance with the EN ISO 20345:2011 standard, the built-in protective toecap serves to protect the toes from impacts of an energy level of 200 J and a compression at a load of 15 kN. The protective midsole is positioned in the sole and penetration is prevented until a force of 1100 N. Dunlop boots with a protective toecap and midsole are labelled as Full Safety.
Purofort® boots prevent heat loss and offer outstanding thermal properties. Due to the unique recipe and molecular structure, all Purofort boots assure excellent cold insulation down to -20 °C. And even down to -50 °C in case of Purofort Thermo+ boots. Purofort boots are classified as CI, meaning that the temperature decrease measured at the upper surface of the insole does not exceed 10 °C after 30 minutes.
By design, the boots offer a perfect fit, optimizing comfort for everyday use.
The boots are 100% waterproof to keep your feet dry under wet and dirty conditions.
Fuel oil resistant
The outsole is resistant against oil, which assures that potentially adverse effects of oily substances on the protective properties of the boots are minimized.
The boots offer protection against a wide variety of chemicals. The specific application with types of chemicals encountered and conditions faced will determine which boot should be opted for.
The boots feature energy absorption of the heel region which limits impact to the foot while walking. The provision of shock absorption capabilities within the footwear minimizes risk of injuries.
The static dissipative properties of these boots provide a resistance of between 1 MOhm and 100 MOhm, when applied voltage of 500V for 5 second. These boots avoid electrostatic charge and eliminate the risk of electric shocks.
- Oil, Gas & Mining
- Material boot shaft
- Material outsole
- Color boot shaft
- Color outsole
- Toe cap
- Cold insulation (°C)
- Cold insulation (°F)
- Oil resistant outsole
- Chemical resistant code
- Energy absorbing
- Cut resistant
- Heat resistant outsole
- Fuel oil resistant
- Ankle protection
- Electrical insulation
- Size range EUR
- Size range UK
- Size range US